2T/5T/8T/10T/12T Kowane Batch Taya/Rubber/Pyrolysis Shuka

2T/5T/8T/10T/12T Kowane Batch Taya/Rubber/Pyrolysis Shuka

Bukatun abokin ciniki:Saurin shigarwa da sassa masu motsi

Maganintanmu:

(1) Haɗa reactor, murfin da tushe tare a cikin masana'antar mu.Don sauƙin shigarwa da jigilar kaya.Duba hotuna a kasa.

(2) Haɗa tankin ruwa na ƙarfe da bututu a cikin masana'antar mu, maimakon kandami ruwa da bututu suna taruwa a cikin wurin aikin ku.Don sauƙin shigarwa da motsi.

Duba hotuna a kasa.

Fasaloli da ƙa'idar aiki

1. Hanyar Loda Taya: Wannan na'ura ta zaɓi abu mai ɗaukar nauyin ciyarwar ruwa ta atomatik.Mai ciyar da ruwa ta atomatik na iya tura cikakken taya a ciki ta atomatik.kuma yana ɗaukar ƙarin taya 2mt-3mt fiye da bel na jigilar kaya.
2. Yanayin dumama: Wannan pyrolysis shuka za mu iya zaɓar sharar gida mai gas dumama, taya mai dumama, nauyi mai dumama, na halitta gas dumama, itace dumama, kwal dumama da dai sauransu.Bayan injin yana dumama sa'o'i 2-3, zai fara samar da man taya kuma yana nufin yayin da aka samar da iskar gas wanda za'a iya sake yin amfani da shi don dumama na'urar da kanta da adana wutar lantarki.
3. Hanyar kwantar da hankali: Wannan injin pyrolysis muna amfani da kandami ruwa & tsarin sanyaya hasumiya mai sanyaya. Pond da bututu suna daidaitawa tare, sauƙaƙe shigarwa da motsawa.Gas mai haske na pyrolysis yana shiga cikin bututun da aka naɗe kuma ya zama sanyi da ruwa a waje da bututu kuma ya shiga cikin tankin mai mai haske, iskar mai mai nauyi yana shiga cikin tankin damper.Muna samar da bututun raka'a 16 kuma muna tabbatar da isasshen wurin musayar zafi da haɓaka ƙimar iskar gas.
4. Kayayyakin Ƙarshe (Misali, taya mai sharar gida): Yawan amfanin mai: 42-45%;Carbon baki: 30%;Sharar gida: 15%;Gas mai datti: 10%.

Layout a cikin 3D don ambaton ku (Za a iya tsara shimfidar wuri bisa rukunin aikinku):

Jimlar shuka yana buƙatar kawai a sanya shi a kan bene mai lebur, ba buƙatar kusoshi don gyara ƙasa ba.